Specifications
| Parameter | Value/Range |
|---|---|
| Nominal Thickness | 0.50mm (卤0.02mm) |
| Available Substrates | PPGI, PPGL, GI, GL |
| Coating Mass (GI) | Z80 to Z200 g/m2 |
| Coating Mass (GL) | AZ80 to AZ150 g/m2 |
| Widths | 914mm, 1000mm, 1200mm, 1250mm |
| Yield Strength | G300 to G550 MPa |
| Paint Type | PE, SMP, HDP (as required) |
| Tolerance Control | Excellent thickness uniformity for automated lines |
Manufacturing Note: We use precision slitting and tension leveling for these coils to guarantee minimal camber and optimal flatness, crucial for seamless processing on your end.
Application
Metal Ceiling Systems: For lightweight, non-load-bearing ceiling structures.
Non-Structural Roofing: Ideal for smaller spans, awnings, and carports.
Ductwork and Ventilation: Essential for HVAC systems due to good formability and rigidity.
Electrical Cabinets: Used for casing and internal components where strength is secondary to lightness and cost.
Advantages
Optimized Cost-to-Strength Ratio: Provides required durability without the unnecessary material cost of thicker gauges.
Ease of Handling: Lighter coils and sheets reduce transport and installation effort.
High Volume Production: Thinner materials mean more linear meters per coil, optimizing production runs.
Superior Paint Adhesion: The controlled base surface finish ensures excellent bonding for the paint layer.
