Color-coated board is currently a very widely used building material. Most people use it, but in the process of using i...
Color-coated board is currently a very widely used building material. Most people use it, but in the process of using it, there will often be problems of contamination with adhesives. Do you know any ways to deal with adhesives? Let's take a look!
Color-coated sheets are currently used in a wide range, and most of the construction industry will use it, so in the construction process sometimes there will be a phenomenon of contamination with stickers. There are some methods and tricks for handling stickers that you can master. It can better remove the influence of self-adhesive tape.
1. If the area touched by the color-coated board sticker is not very large, you can wipe it off with a drawing eraser directly, but remember to use a relatively clean eraser, not the one that will make it dirty. The one that is still very sticky, that will stain the surface material.
2. The color-coated board contaminates the larger area. It will take longer to use an eraser, and it may not be cleaned. At this time, you can take a clean towel instead of the one that is easy to shed. Dip it with gasoline or alcohol for scrubbing, so it will be easily scrubbed off.
3. If you don't need gasoline or alcohol, there is actually another way, but this is more troublesome, just use warm water or hot water to scrub it repeatedly, and then use soap after the color-coated galvanized sheet is softened. Cleaning, this method wastes time, so it is not recommended, but if there are no materials such as alcohol and gasoline. Then only use this, so scrubbing will actually be cleaner.
4. There is also a cleaning agent such as asphalt and tar. There are many car wash shops with this cleaning agent.