The selection of stainless steel plates should consider […]
The selection of stainless steel plates should consider the operating conditions, such as manual operation or automatic operation, the performance and type of the hot press, and the quality requirements of the pressed materials such as hardness and gloss. Also consider the economic accounting, each time a new polished steel plate, the number of times to produce a slow quality decorative board.
In addition, when selecting the reasonable thickness of the steel coil, the time, quality and rigidity of the steel plate should be considered, and the strength requirements of the plate under pressure should be considered; the heat conduction performance; the pressure distribution, the format of the pressure plate.
If the thickness of the steel plate is not enough, it is easy to bend, which will affect the production of decorative panels. If the thickness is too large, the steel plate is too heavy, which not only increases the cost of the steel plate, but also brings difficulty in operation. At the same time, the remaining amount of stainless steel plate processing or use should be considered. The thickness of the copper plate is not consistent, but the thickness of the same steel plate is to be as uniform as possible.
Generally, the medium-sized saw blade has a thickness tolerance of 0.05-o.15 mm. If the requirements are too strict, the grinding costs will also increase. Generally, it is a steel plate with large tensile strength and hardness, and the greater the resistance to mechanical damage, the longer the durability of use, but the processing cost of the grinding boring is also relatively high.