4. Color steel plate When transporting the plate, it sh […]
4. Color steel plate When transporting the plate, it should be noted that the height of the transport plate exceeds the length of the trailer, and the corresponding anti-overturning work should be carried out.
When the color steel plate is used to bind the wall panel of the machine room to the vehicle, the angle steel or angle iron of the same board length is placed on the corners of the two sides of the top machine room wall wall, so that the pressure of the rope binding can be evenly distributed to avoid pressure concentration. Damage to the edge of the wall panel of the press room.
If the transportation is long distance or the road conditions are not good, the metal wall machine wall panel is required to be placed horizontally.
5. When the color steel plate is used for the special wall steel plate in the transportation machine room, the length of the steel wall plate should not be more than 1.0 m at the fulcrum to ensure that the material will not be deformed and worn.
If there are more than 2 meters of wallboard, pick out the corresponding board and bundle it in the tail at the end to avoid damage to the wallboard of the machine room caused by the excessive deflection of the tail of the car.
6. When carrying the plate, the color plate should be lifted at the same time to avoid damage to the surface oxide film or coating.